What's UP:If you couldn't find the resources which you need,please tell me[cadxneter@hotmail.com],I will try my best to help you!

VISI.CADCAM.PostProcessor19

adminClicks Comment
Total time. When generate a NC file, Vero Post Processor calculates and memorizes the tool feed time in this variable.
 
To print the all operations tool feed time, we must used item on the “$ENDPP” section. If you use this variable, at the end of operation, you print the partial time. We can’t use this variables with “SPLITC=1 or 2” and “SPLITM=1 or 2”, the value print is wrong.
The advice sections to use this variable are:
 
· $OPERATION_END – print the partial tool feed time, up to that operation.
 
· $ENDPP – print the total tool feed time.
· $END – print the total tool feed time.
 
PTIME Partial time. This variable is equal to the TTIME, but it’s reset each tool change (its value is reset in the $STARTOOL section). We can’t use this variables with “SPLITC=1 or 2” and “SPLITM=1 or 2”, the value print is wrong.

"Join VIP Member,Get Better Resources and Services... "

Contact Us:admin@cadfamily.com


  • Download
  • Articles related to this article

    ◎News
        Comment
        f5
        * Ctrl+Enter